Borg Warner S364.5SXE 64.5/74 Supercore

$ 940.00


Availability: In stock

Brand: Borg Warner

Have questions about a product?
Email us at

BorgWarner Turbo Systems Aftermarket is pleased to announce the release of the AirWerks® SX-E super core assemblies for performance applications. These new part numbers are purpose engineered for both diesel and gasoline high performance applications.

S300 SX-E super cores contain the following exciting new features:
- 360 degree thrust bearing 
- Compressor cover integrated speed sensor port and pre-machined boost port
- Flexible compressor cover outlet options (S300SX-E only)
- Forged milled (billet) compressor wheels with extended tip technology
- Optimized compressor stage aerodynamics
- Interchangeable with existing turbine housings for upgradability
The BorgWarner super core assembly consists of the compressor cover attached to the cartridge, all cartridge to turbine housing mounting hardware, clamp plates, cap screws and mounting gaskets. Speed sensor and turbine outlet V-band are not included with turbo assemblies.  Choose a turbine housing from our extensive list of factory housings as well as our custom cast performance housings.

Compressor Specs:

- Borg Warner 4" Inlet 2.5" outlet compressor housing with port shroud map width enhancement, pre tapped for speed sensor and pressure port. (parts not included and will need to drill through)
- 64.5mm inducer 87.37mm exducer FMW Forged Milled Wheel (Billet)

Turbine Specs:

- 73mm exducer, 80mm inducer turbine wheel
- T3 Open Scroll turbine housing available: .82 A/R, 1.06 A/R with 3" V band outlet
- T3 Twin Scroll Cummins Diesel Specific Housings available in .70 (12cm), .70 (12cm) Gated, .80 (14cm), .80 (14cm) Gated, with HX40 and HE351 Outlet
- T3 Twin Scroll turbine housing available: 1.00, 1.25 A/R with 3" V Band Outlet
- T4 Open Scroll turbine Housings available: .81, .88, .96 A/R with 3" V Band Outlet
- T4 Twin Scroll turbine housings available in .83, .91, 1.00, and 1.10 A/R with 3.5 (4.21 Marmon), 3" V Band, and HX40 outlet options

The bearing housings are not water-cooled and have a 1/4"NPT oil inlet.  The oil drain is the standard T3-T4.

Shipping policy: Many of our products are made to order so we do our best to ship within 48 business hours of receiving payment for your purchase.  We will notify you if there is going to be some sort of delay.

Return policy: We offer a 100% satisfaction guarantee.  If you have any sort of issue with your purchase then please contact us so we can make it right.

All KC Turbo brand products have a 1 year warranty. The warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. If damage is done due to improper care of the purchaser's vehicle, warranty is void.  Warranty's are non-transferable and are only offered to the original purchaser.