Skip to content

CNC-Fab HPOP Lines w/ Crossover - 7.3 POWERSTROKE (L99-2003)

$ 190.00
SKU 300362

Super Duty HPOP Lines W/ Crossover


Features and Details:

  • Burst pressure rating of 16,000psi and working temperature rating of 400*F
  • Nominal working pressure is 5000psi @ 72*F and 3000psi @ 400*F
  • If your engine oil is this hot you have bigger issues to worry about.
  • Kit comes with all necessary fittings
  • 4db reduction in engine noise
  • Nominal working pressure is 5000psi @ 72*F and 3000psi @ 400*F
  • Kit comes with all necessary fittings Bur Pressure rating or 16,000psi and Working Temp rating of 400
  • MADE IN THE USA 


Description:

Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication™ upgrade! Advanced HPOP lines featuring top-of-the-line Aeroquip® hoses with DuPont Teflon™ lining. 

These lines are to replace the typical high mileage expensive leaky oem hpop lines that have the ford stc fittings. Kit comes with two hoses and all necessary fittings to eliminate the quick connect fittings (stc) on the heads and the hpop itself. Hoses are up-sized to 3/8″, using top of the line aeroquip hose utilizing dupont teflon lining with a burst pressure rating of 16,000psi and working temperature rating of 400*f.   Nominal working pressure is 5000psi @ 72*f and 3000psi @ 400*f (if your engine oil is this hot, you have bigger issues to worry about).

The hpx line connects the two heads to help balance the high pressure oil system in each head. It does not create more horsepower, but the majority of owners see a slight to significant decrease in engine idle noise. This is due to the heimholtz resonance that is created from the injectors firing so quickly, and the hpop cannot react quick enough to balance/absorb on its own from back pressure spikes within the system. So when the tiny spikes happen, the hpx line sends the pressure back and forth through the heads instead of hammering on the pump itself.

  

**Pump Fittings: 28FT/LBS • Head Fittings: 23FT/LBS • Hose Ends: 21FT/LBS *AND REMOVE THE SPRING CHECKS IN THE PUMP UNDER THE STOCK FITTINGS** 


**NOTE:  IF YOU ARE UNSURE OF INSTALLING THESE LINES YOURSELF, PLEASE SEEK OUT A COMPETENT AND QUALIFIED TECHNICIAN TO INSTALL THE LINES.  ALSO, WHEN INSTALLING, THE DISC CHECK VALVES BEHIND THE HPOP FITTINGS NEED TO BE REMOVED. THEY ARE NOT NEEDED.  IF YOU HAVE THE PROPER TOOLS TO CHECK TORQUE, THE FITTINGS ARE TO BE SET TO 28FT/LBS.**